This minimizes the downtime due to spanning tree loop determination when failing over. Click the team name to view the team statistics on the Statistics tab and the team properties on the Team Properties tab. On the BASP Statistics tab, you can view performance information about the network adapters that are on a team. This enables you to add multiple virtual adapters that are on different subnets. Choose the Manufacturer 3. Remove team members from the Team Members list by clicking the adapter and then clicking Remove.

Uploader: Dishakar
Date Added: 1 June 2017
File Size: 28.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15622
Price: Free* [*Free Regsitration Required]

The memory mapped address that is assigned to the adapter.

Normally, the checksum function is computed by the protocol stack. The LiveLink feature is supported only for this type of team.

The standby member does not actively send and receive normal network traffic while other adapters on the team are active. You must have administrator privileges to create or modify a team. This is because the setup bacs command automatically generates a setup.

A count of frames that were successfully received and are directed to a broadcast group address. Teaming groadcom a method of creating a virtual LAN a group of multiple adapters that functions as a single adapter.

The number of frames received with CRC errors.

PAUSE frames enable the network adapter and a switch advance control the transmit rate. The number of PCI-E lanes connected to the bridge.


To specify different values, click the desired probe interval in the Probe interval seconds list and click the desired maximum number of probe retries in the Probe maximum retries list.

Broadcom Advanced Control Suite 2 For Windows All

The return loss red curve represents the return loss of the cable under test as a function of frequency in the frequency range [0, On the File menu, click Team Restore. Shows the resource settings for the selected adapter.

VLANs can only be created when all teams members are Broadcom adapters. Type the path and file name of the new configuration fileand then click Save a. This value can never be zero.

Broadcom Advanced Control Suite: Broadcom Gigabit Ethernet Adapter User’s Guide

This mode supports a variety of environments where the link partners are suihe configured to support a proprietary trunking mechanism.

LiveLink mitigates such issues. Right-click the name of the team to be configured, and then click Properties. In the Available Adapters list, click the adapter you want to add to the team, and then click Add you can remove team members from the Team Members list by clicking the adapter and then clicking Remove.

Initializing the Broadcom Advanced Control Suite. advancev


Frame size is set at bytes by default. The released adapters will reappear in the Available Adapters list. By default, this property is set to Advxnced.

Change the type of team. For a comprehensive description of the technology and implementation considerations of the teaming software, refer to the sukte Gigabit Ethernet Teaming Services” section of your Broadcom network adapter user guide.

If the IP address of the probe target changes for any reason, LiveLink must be reconfigured.

To view this information for any team member adapter, click the name of the brpadcom. If you attempt to use a team name more than once, an error message is displayed indicating that the name already exists. Use the InstallShield installer for best results. PAUSE frames enable the network adapter and a switch to control the transmit rate. You must have administrator privileges to create or modify a team.

To create a team using the wizard, see Using Broadcom Teaming Wizard. Only the first probe target is required. The Statistics screen allows you to view traffic statistics for both Broadcom and congrol adapters.